Leading 10 common forklift accidents ， forklift operation should take note of these matters ！.
Leading 10 common forklift accidents ， forklift operation should take note of these matters ！.
Blog Article
Do not underestimate the forklift at the office. If the operation is bad, there will be serious mishaps in minutes, and there are many crashes involving forklifts.
Situation 1: The forklift cargo obstructed the motorist's view, and the person ahead can not be discovered, causing a rolling crash.
Situation 2: In order to keep the balance of the forklift when raising hefty goods, the employees used their body weight as the counterweight, which almost triggered casualties.
Instance 3: The width of the forklift freight goes beyond the allowable size of the path and holds on the roadside shelf, which nearly creates an mishap.
Case 4: Forklift is speeding and surrender throughout a turn.
Case 5: The forklift driver did not notice the pedestrian, and the pedestrian did not notice the forklift.
Situation 6: The forklift raises the employees illegally, the forklift chauffeur does not use the seat belt, the forklift lifter falls and the vehicle driver is squashed when the forklift rolls over.
Case 7: The forklift motorist did not use a safety belt and dropped from the lorry when it rolled over and was crushed.
Forklift operation should take notice of these issues ：.
Start.
1. Before starting, observe the surroundings, and after verifying that there are no obstacles that hinder the security of driving, honk the horn first and then begin.
2. For lorries with hydraulic ( atmospheric pressure) brakes, the brake hydraulic pressure (air pressure) scale must be risk-free prior to starting.
3. When the forklift begins with a lots, the vehicle driver must initially confirm that the load is stable and reliable.
4. The begin should be slow and stable.
Driving.
1. When driving, the elevation in between the bottom end of the fork and the ground should be maintained 300mm-400mm, and the mast ought to be tilted in reverse. .
2. Do not raise the fork too high when driving. When going into and leaving the task site or while driving, take care that there will certainly be no challenges in the sky. When the load is traveling, the fork should not be raised expensive, which will certainly affect the security of the forklift. .
3. After unloading, the fork must be lowered to the regular driving placement prior to driving. .
4. When turning, if there are pedestrians or automobiles nearby, the driving signal needs to be provided initially. High-speed sharp turns are forbidden. High-speed doglegs will create the automobile to shed lateral stability and topple. .
5. When the forklift is downhill, it is strictly forbidden to switch off the fire and slide, and it is prohibited to brake suddenly while driving with lots unless there are special situations.
6. When the forklift is running, it has to obey the traffic rules in the manufacturing facility and should maintain a certain security range from the car in front. .
7. When the forklift is running, the tons must remain in the lowest placement that does not prevent the driving, and the gantry ought to be effectively tilted back. The lots will not be raised except when stacking or packing. .
8. The elevation of the load have to not obstruct the motorist's view. In special scenarios, when the item impacts the forward vision, drive at a low speed when turning around.
9. It is forbidden to switch on the ramp, neither to drive throughout the ramp. .
10. The secure driving rate of the forklift in the factory area is 5 km/h, and it must drive securely at a reduced rate when going into the production workshop area. .
11. When the forklift is raised, lifted or driven, it is prohibited for employees to depend on the fork to hold items and play a stabilizing function. .
12. If issues are located, they will certainly be fixed and reported in a prompt manner, and they will certainly never ever run with health problems or conceal them.
loading and dumping.
1. When fork-loading things, the distance between both forks should be readjusted as needed to make the tons of both forks well balanced and not manipulated, and one side of the thing must be against the shelf. .
2. It is prohibited to deal with a solitary Stand-on Electric Pallet Stacker fork or make use of a fork top or pull. In unique situations, safety and security warning signs need to be established to advise bordering pedestrians. .
3. In the process of packing and discharging things, the forklift has to be braked with the brake. .
4. The rate of the vehicle must be slow and constant. Beware not to roll the wheels on the dunnage, so as not to stretch the rolled items and injure people. .
5. When making use of a fork to fork the goods, the fork must be as deep as feasible under the lots, and it ought to be kept in mind that the fork suggestion need to not touch various other items or items. The load must be maintained with minimal back tilt of the gantry to make sure that the load does not move in reverse. The mast can be tilted onward a little when the tons is reduced to permit simple positioning of the load and removal of the forks. Electric Forklift Truck for Warehouse .
6. It is restricted to fork goods at broadband and collide with tough objects with the fork head. .
7. When the forklift is functioning, it is forbidden for people to loaf the fork, so as to avoid the collapse of the goods and hurt people. .
8. Overloading is forbidden, and it is banned to utilize forks to raise employees to participate in high-altitude operations to avoid high-altitude falling accidents. .
9. It is not allowed to use the brake inertia to slip, put, round or roll things. .
10. It is not enabled to utilize forks to choose, turn pallet unload.
Leaving .
1. It is restricted to leave the forklift when the things on the fork impend. Prior to leaving the forklift, you must discharge the goods or lower the fork structure.
2. Draw the emergency brake manage to dead or dispirit the emergency brake switch.
3. The engine is shut off and the power is removed. (Except for unique situations, such as the chauffeur does not leave the automobile's view and does not surpass 1 minute).
4. Eliminate the secret. .
Forklift Operation Precautions.
1. Prior to and after the forklift operation, the look ought to be examined, and fuel, lubricating oil and cooling water should be added.
2. Examine the security performance of starting, running and stopping.
3. Check whether the lights and horn signals are full and effective.
4. Throughout the operation of the forklift, check whether the stress and temperature are regular.
5. After the forklift is running, the outside leak ought to likewise be checked and the seals must be replaced in time.
Forklift Safety Operation Specifications.
1. You need to check before leaving the vehicle;.
2. When you experience a person in front of you during driving, you ought to send a signal at a distance of 5 m;.
3. The driving speed in the factory does not surpass 5 km/h;.
4. When driving, the nadir of the freight need to be 0.3 m ~ 0.4 m above the ground;.
5. The turning ought to not be also sharp to stop the propensity of " totally free turning";.
6. Adding and down the slope must be slow-moving and uniform, and no switching on the slope is enabled.
7. Do not drive across the slope. When the gradient is higher than 10%, the vehicle ought to be driven backwards when worsening;.
8. When the forklift employees bring the goods and move on, if they come across large or heavy goods and go to the driver's line of vision, they should take the turning around exercise
.
The "Eight Prohibitions" must be complied with in the operation.
1. Single fork procedure is not enabled.
2. It is not permitted to lift the goods for cross country driving.
3. It is not allowed to get the goods by passing on the pallet with the fork.
4. It is not allowed to straight shovel chemicals, flammables and various other dangerous chemicals with forks.
5. It is not enabled to make use of inertia force to get the goods.
6. It is not permitted to use braking pressure to expatriation round or easy-to-roll things.
7. It is not allowed to bring people to work with the pallet or fork, and it is purely forbidden to stand under the fork after the fork is increased.
8. Do not drive side to side on inclines
.
Vehicle parking is not allowed under the list below conditions.
1. Curves, narrow roads, railway crossings;.
2. Areas with a longitudinal incline more than 5%.
3. When there is an obstacle on one side of the road, the opposite side of the section with the exact same size as the barrier need to be within 20 meters at each end.
Web：https://www.onenforklifts.com/
Email：[email protected]
Phone：+86 13827083844